Acrylic Glossy Paints for Airbrush - 29 Acrylic Colors

The HRC (Hikari RC) range comprises 29 colors in acrylic formula specifically designed for painting wired (plastic) or resin 3D prints.

These acrylic paints produce finishes with vivid, opaque, glossy, and highly resistant colors.

The paints are specially formulated for airbrush* and are ready to use, meaning no dilution is necessary for most airbrushes.

►Download the color chart in the attached documents at the top of the page.

* Spray Gun: HIKARI RC range paints are perfect for spraying with a spray gun, both with mini guns (lien mini pistolet gold) or with 1.4mm guns

Advantages & Exceptional Qualities of Glossy Paints for 3D Printing

> Direct adhesion to resin or plastic prints, no sanding required

> Suitable for small pieces (figurines) or large pieces (Cosplay)

> Quick drying and high resistance

> Smooth, easy to paint, resistant to dripping

> UV-resistant colors

> Coverage: 0.6 m² for 60 ml

Another range of matte acrylic colors for airbrush with a matte finish is available here for decorating your 3D prints.

Usage Tips

Pressure: 2.5 – 3 bars

Ideal airbrush nozzle: 0.35mm

Check out our 0.35mm Eclipse airbrush from Iwata manufacturer

Apply a "flash" coat, followed by 1 or 2 glossy coats.

Use the paints preferably between 15 and 25°C.

♣ 1 coat is sufficient for adequate coverage and a glossy finish. This is suitable for 3D printed figurines and other miniature pieces with very fine reliefs. 2 coats create a bit more thickness (50µm dry instead of 25µm dry) and therefore more durability.

Clean and rinse the airbrush quickly with water.

Overlap

The glossy airbrush paints from the HRC series are finishes and do not require clearcoat.

However, it is possible to cover them with all types of paints or clearcoats, even solvent-based.

Varnishing or covering is possible within 24 to 72 hours without sanding.

Attention: when creating different layers of colors with adhesive masks and stencils, it is strongly recommended to let each step dry completely and sand it before applying adhesives and paints.