ASTON MARTIN car paint code - Car colour code in 1K solvent-based basecoat

The paints we offer are solvent-based matt bases*.
These are 1 component paints (1C), which must be varnished.

The Aston Martin color codes that we produce in our laboratory are made according to the manufacturer's formulas which are exactly matched.
We make the tint the same day of your order and we ship it with fast delivery within 24 hours in France.

It is imperative to communicate the color code of your vehicle. This reference, made up of numbers and letters, is generally found in several possible places on the bodywork (inside the door, bonnet, trunk)
>>> After your order, you can send us your color code.

If you wish to verify the references you have, write to us or call us: colors@stardustcolors.com; we respond by email 7 days a week

► TUTORIAL HOW TO PAINT A CAR

The prerequisites for painting your Aston Martin paint

We advise you to use a filling primer, i.e. a primer**. This product is particularly suitable for covering and filling superficial scratches. In addition, it allows you to create a homogeneous background, which will avoid color differences and marbling effects, with the transparent Aston Martin colors. The use of a primer is mandatory on the putty.

Before any application of paint, the background, which may be the old varnish, or the primer, must be sanded with a 500 abrasive sheet (never finer).
it is important that the surface is perfectly dry and dust-free. Normally a degreaser is also used to remove any invisible contaminants, such as silicones or grease.

The mixture

Small format paints come already diluted, so there is nothing to do except stir.
The paints sold in kit, include the pure product with the thinner supplied separately (reduction between 50 and 70%)

Paint application

With a 0.8 / 1.5 mm gun, with a pressure between 2.5 and 3 bars
Apply 2 to 3 thin coats

With an aerosol, the application is the same.
In both cases it is always preferable to apply thin layers rather than thick layers
Depending on the temperature, wait a few minutes (2 to 5) between each layer.
It is important to work with an average temperature between 15 and 25 degrees C.

Varnishing

Use a professional 2-component bodywork varnish.
We recommend UHS 830 varnish which is a very efficient varnish, easy to apply, very shiny and very durable.
It is available both as a kit of pots, or as a two-component aerosol here in the car varnish range
Varnishing is always done with only 2 glossy coats, spaced 10 minutes apart.

*Solvent paints
They have the advantage of drying faster, being finer, easier to work with, and above all, more durable.

**Questions about primer:

Depending on the Aston Martin color, it may be necessary to have a specific color for the background. Don't worry, our colorist takes care of everything and will provide you with your product in the exact shade.
If you did not order a primer and your color requires one, then he will contact you by phone to add this to your order