Candy clearcoat in spraycan - 290ml (all colours) - STARDUST BIKE

Candy paint in spraycan (special 2K)

What is candy paint? It’s the overlap of the metallic basecoat with the candy coloured and transparent topcoat that produces the candy effect.

►TUTORIAL: HOW TO PAINT A BIKE ?

► Tutorial: How to get a deep and intense color

► Tutorial: the Candy technique

The Candy topcoat spraycan allows to clear coat, protect and give a glossy effect and above all to colour while creating depth perception. Depending on the number of Candy passes applied, the final colour will be more or less dark.

Topcats in spray are finishes (re-topcoating optional) that resist to bad weather conditions and chemical products as well.

The color chart PDF below can be found for high definition download at the bottom of the page:

the fluorescent yellow "Candy" 9FG is not UV resistant. it is intended for indoors

OFFER

The product is packaged by us in a special 2-components spraycan (the hardener is integrated in a separate cylinder). 'Candy topcoat in spray’ is produced from an automotive top-grade professional clearcoat, which ensures its glossiness and hardness.  This clearcoat contains a translucent candy ink.

USE

Candy topcoat is coloured and transparent: It must be applied over a metallic or pearl undercoat of a light colour (Refer to our Candy undercoat in spray product page)

The spraycan is a single-use product : Once the can is activated, it must be used within 30min.

ASPECT

Hard and glossy. Glittering colour, deep and luminous.

ADVICE: Read well our PDF colour chart and our advices

APPLICATION

Push button under the spray to activate the mix of the hardener. Shake well before use (lifetime of the spraycan once activated: 30mn at 20°C.)

Coverage: 290ml spraycan = max 0.75 sqm/ 4 coats

Application : Over fresh pearl/metallic paint. Spray 3 to 4 passes, until the desired candy effect.  After complete drying (one night) you can sand and put again topcoat if you wish, to bring more glossiness.

Many uses:

Candy in spray can be used on crystalizer, chrome, Marblelizer....

The application to the aerosol is much less easy than gun, we strongly recommend using our 'SPRAY CAN GRIP HANDLE'