Spray clearcoat 2C – UHS professionnal bicomponent topcoat

Ultra High Solid Clearcoat for professionnal

Aerosol range for automobiles and motorcycles.

The premium Ultra High Solid clearcoat, which creates maximum protection and a strong shine.

It is stronger, thicker, shinier and more resistant than all single-component clearcoats sold commercially. It is a true professional bodywork clearcoat.

The aerosol is made of two separate compartments (clearcoat and hardener) which will open and mix during application. Once activated, the aerosol will last for 1 hour.

Its application is remarkably easy:
Push the red capsule completely under the bottle to engage the hardener. Shake well.

The clearcoat is applied in 2 layers: The first must be medium in thickness.
Wait 4 to 5 minutes before applying the second coat which must be thick and lacquered (without applying too much to avoid any dripping).

Then leave to dry in a dust-free place. Dry to the touch in 2 hours. Dry to the core in 24 hours.

Tip: when applying outside the cabin, spray water around the area on the floor and walls beforehand in order to capture dust.

Performance and questions
Theoretical covering power: 0.6m² (2 coats) / 1 Aerosol

VOC >420g/L

For professionals use only!

The application to the aerosol is much less easy than gun, we strongly recommend using our 'SPRAY CAN GRIP HANDLE'

Tips for varnishing properly:

A shiny, colorless clearcoat is obtained on a motorcycle fairing or car body, by applying the right dose:
Too little = orange peel
Too much = Run
Too hot = Orange peel
Too cold = Run.

To apply the correct dose, you must
respect the time interval between the two layers
respect a distance of 12-15 m from the constant support
respect a fair and constant speed from left to right
respect an angle of 90° to the support