FIAT car paint code - Car colour code in 1K solvent-based basecoat

FIAT paint - all FIAT colour codes – 1K basecoat version

Pure or pre-diluted paint for touching up/complete painting/decoration on Fiat vehicles

Painting a vehicle is always done in 2 steps : This is the « 2-coat » system : base + topcoat. The paint proposed here is the first step. The 1-coat paints called '2K finish' are reserved only for flat non-metallic colours.

It is necessary to have the FIAT colour code for us to make the paint :
Select the packaging (top of the page) and order.
After ordering, tell us the colour code and brand by email in response to the order validation email, or in the box provided when ordering.
If you don't have your FIAT paint code, look for it on your bodywork.

For advice : colors@stardustcolors.com

To find out where the original FIAT codes can be found, click here,

Colour done the same day, delivered in 48 hours!

COMPOSITION : FIAT 1K solvent-based basecoat, first coat of the traditional bodywork system 1K basecoat.
The topcoat is offered separately and is not included in the offer.

FIAT paints are delivered either pure or to be diluted (thinner delivered separately)
except for the 250 ml and 500 ml cans delivered pre-diluted :
coverage of pure paint*: 10 m² / L and per coat
coverage of pre-diluted paint: 6 m² / L and per coat
coverage of the 400 ml aerosol spray paint : 0.5 m² max coverage

FIAT 1K BASECOAT PAINT APPLICATION GUIDE
PREPARE THE BACKGROUND WELL :
It is not always necessary to apply a primer. Often a simple light sanding of the old paint is sufficient (800 grit paper), to allow adhesion.
Dry off any moisture, degrease with our degreaser, (to avoid reactions due to invisible contaminants), remove all traces of degreaser with a clean, dry cloth, then pick up the dust with our sticky wiping pad. 

MIXING :
For pure paints, add about 70% of the thinner supplied with the kit (70 parts in addition to the 100 parts of paint)
For thinned paints 250 or 500 ml, simply stir.

SPRAY GUN APPLICATION :
Using any spray gun with a 1.0 to 1.4 mm nozzle, apply 2 to 3 coats of paint, allowing 2 to 10 minutes drying time between coats (depending on the temperature).
Professional body painters recommend a final light coat from some distance to homogenise the appearance of the metallic paints.

VARNISHING :
It is important to varnish quickly after the application of the base, in order to maintain a good adhesion between the paint and the topclear.
Among our wide range of car topclears, we offer BS 830 UHS, a high quality, reliable and easy to apply clearcoat that is durable and resistant.

Other technical characteristics : 
VOC g/L: <860 (diluted)

For use in professional booths only