Glue for gilding with gold leaf - Mixtion 75ml

Mixtion glue will ensure the good adhesion of gold leaf on different types of supports.

Mixtion glue must first be dried partially before applying the gold leaf.

The gilding mix is ​​a very liquid product, and therefore ready to use for 0.3 mm airbrushes.

Before receiving gold leaf, they must first be dried partially..

After applying the glue, it is very important to wait for the correct drying time before laying the gold leaf.

Preparation:

Mixtion glue is ready to use to glued the sheets to be gilded.

Application :

Apply glue to a clean, dry substrate.
Leave to rest for 15 minutes, then finally cover the support glued with the leaves to be browned.


In all cases, do not put the sheet on the paste when it is "wet".
It is necessary to wait until the surface becomes "amorous" according to the term of the gilders.
Check by passing the back of the finger to the surface; When the glue is in love, it retains some bite power, but is no longer sticky in excess / wet.


Question:
Hello, I would like to know if the mixing GEDEO for gilding is compatible with body varnishes?

Reply :
Yes, if it is dry before being varnished.
After evaporation, it forms a dry film, resistant to solvents.


Discover our gold and silver leaves!