1K GRAPHIC airbrush solvent topcoat - 3 types

The airbrush solvent paint range includes three different types of topcoat

These topcoats are consistent with the rest of the Graphic range, they are easy to use and are therefore single component and without hardener
They are new generation topcoats ensuring an excellent gloss and a very good level of resistance to scratches, chemicals, sunlight and heat
The three topcoats are anti UV and anti yellowing
 
To give the painter the greatest freedom, the last three are delivered pure and undiluted
Thus it is convenient for each user, according to their personal preference, and especially according to the size of their airbrush nozzle, to dilute from 50 to 100 %.
In contrast to two-component body paints, which cure by polymerization, one-component paints cure faster and only with air and temperature

Characteristics of the three types of 1K topcoats (1 component)

 High thickness gloss topcoat : Ultra-thick glossy topcoat, antioxidant properties, especially clings to metals, iron, stainless steel, steel, aluminum, galva. The topcoat has an extraordinary thickness thanks to its very high solids content. It can reach an unequalled thickness even when talking about two-component topcoat. It is an excellent topcoat to fill in unevenness and differences in thickness after masking and filleting work. It can also be used pure with a brush to fill in missing areas, like a casting resin.

Gloss topcoat : classic gloss topcoat, anti-runoff, fast drying. The gloss topcoat is a classic topcoat with excellent resistance and fast drying. It can be used, for example, after a day's work following a freehand drawing or a decoration made with different coats of color, to fix and protect the whole before resuming the painting the next day with a light sanding

4° matte topcoat : Matte topcoat, quick drying, easy to apply. The matte topcoat is easy to apply and gives a pleasant visual effect capturing all the light reflections.

Drying :

Touch dry: 30 minutes
Drying time : 1 hour

Use :

our topcoats are suitable for interior and exterior
for decoration on car bodies, decoration, industry
These are finishes. However it is possible to re-varnish them with any other topcoat

Recommendations of dilution according to the nozzles

0.2 mm nozzle. 80% dilution
0.3 to 0.35 mm nozzle 70% dilution
0.5 mm nozzle dilution at 50 to 60%.
In the GRAPHIC range, two thinners are available, a normal thinner and a delay thinner, useful in hot weather conditions, during the summer for example, in order to avoid "chalking" or "overspray" phenomena

Application

The application must be done on a wet-on-wet paint base within 30 minutes, or on the painted base sanded to 500.

Safety

harmful and flammable products. Read and understand the safety data sheets before use