Mercedes colour code - direct gloss 2K paint in spray or set with hardener

Mercedes "direct gloss" paint

Offers: The product is sold as a complete kit which includes lacquer, hardener and thinner.
Our offers are valid for all existing Mercedes color codes.

Our colorist produces your shade in 30 minutes and ships it the same day

During the order: note the color code, or
After ordering: tell us the Mercedes color code by email.

► TUTORIAL HOW TO PAINT A CAR

Choose jar / or aerosol packaging*

the 2K aerosol has a button on its lower part: when pressed it releases a hardener, and must be used within an hour.

A question ? a doubt about your Mercedes color? write to colors@stardustcolors.com
and receive a response the same day

How to know your Mercedes Benz color code?
This one appears in several locations of the car:

Inside the engine compartment.
Inside the left front door on the driver's side. here is where the Mercedes code is
Pearlescent or metallic Mercedes paintwork:
Warning ! it's shade cannot be made in direct gloss, it can be formulated in MATE BASE only

Mercedes direct gloss paint

Direct gloss paint formula Stardust Colors
Outstanding properties: Flexibility, High gloss index and resistance to scratches, gasoline, ultraviolet rays.
Our colorimetry team is trained to provide real quality control of each of the colors reproduced.

Mercedes paint application:

Mixed:
The product hardens with a hardener. Attention: at room temperature, once the hardener is added, the product must be used within 3 hours.
The mixture is done by volume (not by weight) at 2 for 1:
- 100 volumes of paint
- 50 volumes of hardener
- dilution according to the preference of the painter: about 10% thinner

Before application:
Thoroughly degrease, clean, dust and prepare the raw surface if necessary (if it is metal, plastic, etc.)
On old paints, no primer is necessary: a light sanding with 800 is enough to create the grip.

Application:
Mercedes Direct Gloss Paint is a thick, glossy lacquer:

if you apply too thin a layer, it does not shine
if you apply a layer that is too wet/too thick, it runs
Spray (1.2 - 1.5mm) apply 1 or 2 coats, respecting an interval of 10min
It is recommended to paint at a temperature of at least 20°C

Drying:
Touch dry in 1 hour
Through-dry: 24 hours

The content of the Mercedes direct gloss paint offers:
- 0.375ml kit (250ml + 125ml hardener)
- 0.875ml kit (500ml + 250ml hardener + 100ml thinner)
- 1.650L kit (1L + 0.5L hardener + 150ml thinner)
- 8.5 L kit (5L + 2.50L hardener + 1L thinner)

Theoretical yield: for 60µm dry: 9-10m²/ L and per coat

Other technical characteristics of the Mercedes direct gloss lacquer

Density (Weight in kg / L) = 1.38
High dry extract: 67%
Product family: Polyurethane acrylic (solvent-based product complying with European standards < 420 g / L)

This product is sold in compliance with Directive 2004/42/EC and the policy to reduce the use of solvents. The PDF is available at the top of this page.