COMPLETE MOTORCYCLE KIT – MANUFACTURER'S COLOUR TONE

The Complete Motorcycle Kit – Manufacturer's colour tone includes all the necessary products to paint (repaint) a motorcycle from start to finish.

How to order a colour tone :

Choose the packaging and order.

After order, tell us the color code of the bike + the brand by mail in response to the order confirmation email

In case of right on a code or a three-layer system write to colors@stardustcolors.com.

In case of incorrect code, the technician will contact you. In case of impossibility to make the color, the order will be immediately refunded.

__________________________________________________________________________________

Check out here our tutorial on “How to paint a motorcycle” 

Data sheets with instructions for application are printed on the packaging.

All the manufacturers colour tones are made by us directly in our St Laurent des Arbres site, in the Gard region.

To find the corresponding colour that matches your motorcycle, you can refer to the table "FIND A MANUFACTURER COLOUR TONE" on the right of the page. It is necessary to specify this code in the corresponding box when you place your order in the summary page of your cart.

Our technical support can be contacted by email for further information.

The details of the “cans kit” or “aerosols kit" offers :

Complete kit in aerosols :

3 x 2C AEROSOL BODYWORK PRIMER TRIM
4 x SOLVENT-BASED TWO-COAT CAR PAINT TO VARNISH - MANUFACTURER AEROSOL TINT
3 x BODY VARNISH 830UHS 2C AEROSOL

Complete kit in cans :

750mL - P410 BODYWORK PRIMER GRAY (500mL Primer + 125ml H400 hardener + 125ml V1 thinner)
500mL tint + 500mL thinner - SOLVENT-BASED TWO-COAT CAR PAINT TO VARNISH - MANUFACTURER COLOR
1.5L UHS 830 VARNISH (1L UHS 830 clearcoat + 330ml 432 hardener + 150ml 710 thinner)

The potted product kit is much more interesting in a pot, for application with a paint gun. It contains more quantity and it is more economical

Professional aerosols :

All primer and varnish aerosols are of the two-component type : they contain an integrated hardener. They are single use.

**

APPLICATION GUIDE :

the old painted bottom should be sanded lightly with a P320 sanding sheet.

Apply 2 coats of primers, with 5-10 minute time intervals

Drying : 4h / 20°C
Sanding with P500 sanding sheet

Application of Moto paint, with a few thin coats, spaced 5 minutes apart. Apply paint until bottom coverage is achieved.

Apply the varnish before 30 minutes at 20°C, or wait 2 hours then sand with a fine gray abrasive sponge.

Apply 2 coats with 10 minutes interval between each coat.
Dry 24 hours before commissioning

*

The varnish supplied in the Kits can be supplied in a matt version, exclusively on request by email, after ordering. By default, we provide gloss varnishes in the kits.

Find our matte effect varnishes here.

Important :

Some tri-coat colors require an additional specific undercoat, if your color code requires this additional undercoat our technician will contact you to offer you the first coat tint.

Product does not comply with Directive 2004/42/EC appendix II B. Paint product recommended for customization and decoration work on vehicles, trucks, motorcycles, jetskys, bicycles, helmets or vintage cars. Also suitable for all objects, equipment, furniture and suitably prepared and/or primed surfaces