Nissan car paint code - Car colour code in 1K solvent-based basecoat

To order a Nissan manufacturer color, you are on the right page.
What you need is your NISSAN color code, or the Nissan "color name".
The code consists of a few numbers and/or letters. You will normally find it on a plate inside the passenger door.

1 > After selecting your packaging above in the drop-down menu, place the order
2 > Send your code by email, just after

Our NISSAN paint
1-component solvent-based paint
"matt base coat to clearcoat"
first coat of the automotive paint system
> Nissan matt base coat + 2C clearcoat *

Most of the NISSAN brand colors are matched by our colorist according to an original formula. We prepare the custom paint on the day of the order, and we ship the same day (for any order validated before 12 noon)

We offer both paint pots from 250 ml but also aerosols.

► TUTORIAL HOW TO PAINT A CAR

Mixing paints
250 / 500 ml pots: ready to paint
1L / 2 L kit pots: pure paint to dilute**

**Mix 100 parts of paint for 50 to 70 parts of thinner
the mixture can be done by weight or by volume, approximately

Application guide

1/ The first step is the preparation of the support
this can be a simple light sanding with abrasive 500 of the old original paint or varnish
or a primer***, which allows to fill and surface the bottom (in the case of irregularities or scratches), sanded with 500
The bottom must not be stripped.

*** if you order this primer, our preparers will take care to check the color needed for your Nissan paint, and will deliver the right color to you

In the rules of the art of bodywork painting, it is essential to have a perfectly healthy base.
- sand / degrease / dry / dust

2 / Application of the Nissan color code paint with a spray gun or aerosol

a / Stir / shake the paint well or shake the aerosol
b/ At 12-15 cm from the surface, spray 3 thin coats, with a waiting interval of 2 to 5 minutes depending on the ambient temperature.
c/ Rinse your gun and immediately prepare the clearcoat mixture with its hardener and thinner
d/ Varnish with 2 glossy coats, without excess, without missing, respecting 10 minutes between the two coats.

You will find valuable advice on our product page for UHS 830 clearcoat

In the case of a touch-up on a part, you must always clearcoated the entire part.

If you need answers or advice, do not hesitate to ask our technician for help here tech@stardustcolors.com . He will answer you 7/7

*Car body clearcoats
It is a clear and shiny product, whose formula is acrylic polyurethane, therefore two-component (2C)
It protects against scratches, humidity, but also the sun.
After curing for 24 hours, it forms a shiny and very hard layer.
It is perfectly impermeable to fuels

We recommend the 830 UHS varnish in a pot (kit) or in a 2C aerosol can. Find our range of clearcoats for cars on the website