Peugeot colour code - direct gloss 2K paint in spray or set with hardener

Peugeot "direct gloss" type paint

Offers: Complete Kit (Lacquer + Hardener + Thinner)
The detail of the Kits is available above on the right of the photos

To send us your color code:
During the order: note the color code in the specific box, before validating your basket
After ordering: tell us the Peugeot color code directly by email.

A question ? a doubt about your Peugeot color code?
write to colors@stardustcolors.com
and receive a response the same day

► TUTORIAL HOW TO PAINT A CAR

Easily find the PEUGEOT paint code:

For PEUGEOT brand vehicles, the plate mentioning the paint color code (vinplate) can be found in 3 different places.

- Inside the engine compartment.
- On the left front door leaf (driver's side).
- On the pillar of the front left door (driver's side).

You can take help from the images provided below which illustrates the location.

The color code is always composed of three characters (letters or numbers).

PEUGEOT metallic or pearlescent paintwork:
Warning ! these shades cannot be made in direct gloss, they can only be formulated in MATE BASE only

Stardust Colors direct gloss
Extraordinary properties of Flexibility, resistance (anti-scratch, gasoline, ultraviolet rays).
And above all a high gloss index
Our colorimetry department is trained to provide real quality control during the preparation of each of the PEUGEOT car colours.

Peugeot Direct Glossy Car Paint

Peugeot paint application:
Mixed:
The product is catalyzed by its hardener.
Attention: at room temperature, once the hardener is mixed, the pot life of the mixed product is 3 hours.
The mixture is done by volume (not by weight) at 2 for 1:
- 100 parts of paint
- 50 parts hardener
- dilution according to the painter's preference: around 10% thinner

Before application:
Degrease, clean, dust and prime the raw surface if necessary (if it is metal, plastic, etc.)
On old paints, the use of a primer is not necessary: a light sanding with 800 grit is sufficient to create the grip.

Application:
Spray (nozzle between 1.2 and 1.5mm) apply 1 or 2 coats, respecting an interval of 10min
It is strongly recommended to paint at a temperature of at least 20°C

With the aerosol: shake the can well vertically, then activate the hardener at the bottom of the aerosol thanks to the red cap.

Important :

PEUGEOT car paint in direct gloss is a glossy and thick lacquer:
Applying too thin a coat may result in a lack of shine.
Applying a layer that is too thick/wet may cause dripping.

Drying:
Dry to the touch in 1 hour and completely dry in 24 hours

Yield: 9-10m² per L

Other technical characteristics of PEUGEOT direct gloss lacquer

Density (Weight in kg / L) = 1.38
High dry extract: 67%
Product family: Polyurethane acrylic (solvent-based product complying with European standards < 420 g / L)

This product is offered for sale within the framework of Directive 2004/42/EC and the policy to reduce the use of solvents. The PDF is available at the bottom of this page.