HRC105 - Bleed Checker - Anti-Color Migration Sealant for Airbrushing

The "Bleed Checker" is a product used in airbrushing, of the interlayer type, transparent and colorless. It is an anti-migration sealant that blocks dyes and reduces the risk of color migration.

Soluble dyes like Candy type colors tend to bleed even after drying and penetrate through layers to stain or discolor freshly applied layers.

The defect is usually visible when applying a light or white-colored paint.

The "Bleed Checker" can be used in all airbrush painting practices and can be useful for blocking backgrounds, protecting a design or drawing during a break, or even for spraying at the intersection of certain adhesives to prevent infiltration.

The "Bleed Checker" is very effective in blocking the passage of soluble dyes*.

Classic colors made with pigments do not migrate.

It is the transparent and soluble dye colors, the candy colors, that have the ability to dissolve and migrate.

Destination :

All acrylic paints for airbrushing

Use & Mixing :

airbrushes and paint guns

nozzle from 0.3mm

Ready-to-use product

it can be diluted with distilled water

Yield 1L  :

60 ml = 0.3m² / 2 coats with a dry thickness of 50µm

Color & Appearance :

Transparent and matte

non-whitening

Surface Preparation & Application :

Application should be done on paint that has been dry for at least one hour.

The surface should be sanded with a Gray abrasive pad if the paint has been dry for more than 48 hours.

Apply 2 coats, with an interval of 10 minutes

Coverage & Drying :

The "Bleed Checker" dries in one hour at 20°C for 2 coats.

It can be recoated without sanding for 24 to 48 hours.

It is advisable to wait for an extended optimal drying time before recoating with the next color.