Toyota colour code - direct gloss 2K paint in spray or set with hardener

TOYOTA direct gloss paintwork - all color codes

Ordering a shade is very simple!

Choose the packaging and order.
After ordering by email in response to the order validation email, or in the color code box in the basket, specify the color code of the car + brand

Our colorist technician in charge of producing your Toyota tint is at your disposal from Monday to Friday. Write to him colors@stardustcolors.com and he will get back to you.

Don't have your TOYOTA color code?

This code, always made up of three characters (letters or numbers), necessary to carry out the TOYOTA paintwork, is easy to find: the plate mentioning the color code (vinplate) can be found in four different places.

- Inside the engine compartment.
- Between the two doors on the right side (passenger side).
- Between the two doors on the left side (driver's side).
- On the left front door leaf (driver's side)

HIGH QUALITY DIRECT GLOSS FOR TOYOTA VEHICLE

The UHS Direct Gloss Lacquer Finish is developed for the refinishing (repairs, touch-ups, complete) of automobile and heavy goods vehicle bodies.

7080 Lacquer is a premium Low VOC product.

UHS *: Ultra HigH Solid means that the solids content after evaporation of the solvents is higher. This allows for better packing, greater thickness, and better durability.
Gloss Direct: This means that the product does not need to be varnished; as opposed to two-coat basecoats, it is glossy, hard and resistant in a single step.

All TOYOTA paint color codes since 1950*

Important: The realization of a "direct gloss" paint is only possible in so-called opaque shade (NOT METALLIC or PEARL)

DESCRIPTION OF OUR OFFERS:

complete kit that includes lacquer, hardener and thinner.
personalized tinting by our colorimetry service the same day* included
Each offer offers the choice of a standard/slow hardener version (for work in a paint booth) or a fast version (small room or cold weather): Choice possible by simple message with yields in m² in 2 coats

- 0.375ml kit (1.5m²): 250ml lacquer + 125ml hardener
- 0.875ml kit (3m²): 500ml lacquer + 250ml hardener + 125ml thinner
- 1,650ml kit (6m²): 500ml lacquer + 250ml hardener + 125ml thinner
- 8.5 L kit (30m²): 5L lacquer + 2.5L hardener + 1L thinner
- 1 bi-component aerosol 290ml (0.5m² max)
- Set of 3 two-component aerosols 290ml (1.5m² max)

USE OF DIRECT GLOSS UHS 7080 series

It is a two-component lacquer: this means that the drying is done by polymerization using a hardener.
The product does not air dry. Caution: Once the hardener is added, the product must be used within 3 hours.
You can let it sit for 15 minutes to allow the product to stabilize.

THE MIXING is done by volume (not by weight) at 2:1:
- 100 volumes of lacquer 7080
- 50 volumes of hardener
- dilution according to the preference of the painter: about 10% thinner
Hardener and thinner are supplied with the paint

Before application:
Thoroughly degrease, clean, dust and prepare the raw surface if necessary (if it is metal, plastic, etc.)
Our adhesion primers and our filling primers are present in the PRIMARY category
and also in aerosol version
On old paintings, in good condition, no primer is necessary: a light sanding with 800 is enough to create the grip.

Application:
Spray (1.2 - 1.5mm) in 1 or 2 coats (10min interval)
Recommended dry film thickness: 60µm for two coats

Drying:
Touch dry in 1 hour
Dry: 4-5h
Density (Weight in kg / L) = 1.38
High dry extract: 67%
Product family: Polyurethane acrylic (solvent-based product complying with European standards < 420 g / L)

Theoretical yield: for 60µm dry: 9-10m²/ L

MAIN QUALITIES:

Flexibility
Strong covering and filling
High gloss index
High resistance against scratches, gasoline, ultraviolet rays.

This product is offered for sale within the framework of Directive 2004/42/EC and the policy to reduce the use of solvents. The PDF is available at the top of this page.