Surfacer primer for bike frames in Spray - Stardust Bike

Surfacer filler for bike frames

The Stardust Bike range offers a series of professional and specialized primers for the general public. A primer is a product that prepares the surface for painting, in most cases it allows a good adhesion to the surface, and in other cases it allows to modify the surface condition.

The surfacer is a thick product that will create a perfectly smooth surface ready for painting, on the frame of the bike
It is a necessary product when the bike frame has been repaired and putty has been applied.

►TUTORIAL: HOW TO PAINT A BIKE ?

Application :

1 to 4 coats can be applied, depending on the surface condition
a drying time of about five minutes is allowed between each coat.

Drying and sanding :

Bike surfacer primer is a filling primer that is intended to be sanded.
Drying time is 2 to 6 hours depending on the number of coats.
After drying, sanding is done with 400 grit paper and water to remove most of it. After sanding, the frame is rinsed with water and then dried, it is now ready to be painted.

The primer will fill in any micro imperfections and scratches, and prepare the ground for the paint and clearcoat.

Adhesion :

This spray primer has a good adhesion on ferrous metals and of course on old sanded paints. On non-ferrous metals and carbon it is strongly recommended to use a specific primer beforehand.

Colors :

Stardust Bike filler Spray is available in white, black, or gray.

It is very important to choose the color that matches the paint being applied :
for example for a white pearlescent paint we will use a white background, and for a chameleon paint we will use a black background. The background color required is indicated in the product pages of the effect paints.

Type :

Flammable solvent-based product
Two-component Spray : trigger the hardener before use with the button located under the spray
Single use : use within two hours maximum after triggering.


Theoretical coverage 1m² / Spray can can / 1 coat
Thickness : 1 coat = 25µm dry


Product for professional use ! Use with a paint mask, and in a place with sufficient air circulation