PPG Deltron® plastic degreasing and antistatic agent D846

Presentation of the PPG Deltron® cleaner - D846

it is a mild cleaning and degreasing agent specially designed for plastics.

Very effective in removing oils and plasticizers which are invisible contaminants on plastics.

The degreasing agent for Plastics D846 - DX103 is a specifically alcoholic mixture

designed to degrease plastic surfaces without damaging them. After spraying on the plastic and then evaporating, D846 transforms into an antistatic agent.

Recommended use for cleaning and removing static electricity from new and old plastic surfaces

PPG D846 is suitable for all plastics (PS, ABS, PP, PE, PC, PVC)

Packaging: 1 Liter

How to use PPG Deltron® D846 Anti Static Cleaner?

• Apply a generous amount of Deltron D846 Cleaner to a clean cloth.
• Wipe the entire room
• Wipe surfaces in one direction only to avoid spreading contaminants.
• After using the degreaser, wipe off excess cleaner with a clean, dry cloth.

Attention ! do not allow the product to dry on the surface that has just been cleaned

Note: Do not apply antistatic agent D846 to solvent-sensitive plastics.

Application of PPG Deltron® D846 anti-static degreaser on plastics

In the field of automobile or motorcycle bodywork, the plastics encountered are often PP or PE, and sometimes ABS. This could be, for example, a bumper, a fairing. They are flexible and resistant plastics, which are difficult to adhere to, especially PP (polypropylene) and PE (polyethylene).

To obtain a perfect guarantee of adhesion and good hold, before degreasing, carry out rigorous preparation of the support, according to this 5-step process:

1 ► degrease bare plastics with D8434 PPG Deltron® plastic support cleaner

2 ► Pass the plastics to the flame, using a gas torch with a triangular tip. 1 or 2 short passages are enough.

3 ► Scrub the plastics thoroughly with a green abrasive sponge dipped in a thinner-type solvent.

4 ► To clean and remove surface tension, apply PPG Deltron® anti-static cleaner D846

5 ► Apply the adhesion promoter to PE or PP plastics in 1 coat and immediately follow with a thin layer of paint or primer to ensure perfect cohesion of the paint.

For plastics already painted:

For surfaces painted with hydro paints, and in particular before varnishing, use the mild degreaser D837 PPG Deltron® Spirit Wipe which is a general cleaner

For surfaces painted with solvent-based paints, use BS refinish degreaser

Use and application of PPG D846 anti-static degreaser:

Application on fragile plastics

Certain products and paints should not be used on surfaces that are very sensitive to solvents, such as polystyrene (PS). Do not use solvent-based paints or D846/D8434 cleaner on PS plastics.

We recommend using our hydro plastic primer

Security

This product is intended exclusively for professional use.

The information in this notice is given for information purposes only.

Any person using this product without having first checked whether the product is suitable for the use they wish to make of it, acts at their own risk.

Legislation

In accordance with current standards, the European limit value of D846 Plastic-antistatic degreaser (product category: IIB.a), in its ready-to-use form, is a maximum of 850 g/liter of VOC.